A wax seal is one of the smallest details on a wedding invitation and one of the first things guests notice. Sealing a hundred envelopes is a different job from sealing one letter, though. It calls for a plan: which method to use, how much wax to buy, how to set up a production line at your table, and how to get the finished invitations through the mail in good shape. This guide walks through each decision.
Step 1: Choose your method
There are three ways to put a wax seal on an invitation.
Stamp directly on each envelope. You pour wax onto the flap and press the stamp, one envelope at a time. This is the traditional approach and gives the most authentic result, with wax bonded to the paper. The drawback is risk: a bad pour happens on the envelope you have already addressed.
Make seals ahead and stick them on. You pour and stamp all the seals on a silicone mat or parchment paper, let them cool, and attach each one to an envelope with a double-sided adhesive dot. A mistake costs you a few beads, not an envelope. You can also spread the work over several evenings and apply the seals in minutes at the end. This is the lower-risk route for a large batch.
Buy ready-made seal stickers. Self-adhesive seals arrive finished. You peel and press. This is the fastest option by far and needs no tools, though you are limited to the designs available.
If the seal design matters to you and you have a few free evenings, make them ahead. If the calendar is tight, ready-made stickers are a sensible choice, and no guest will think less of the invitation.
Step 2: Decide where the seal goes
- On the outer envelope flap. The classic placement. The seal is exposed to postal handling, so read the mailing section below.
- On the inner envelope. If your suite uses an inner and an outer envelope, sealing the inner one keeps the wax fully protected.
- On a vellum wrap or belly band. The seal holds a sheet of vellum or a band around the invitation card. It sits inside the envelope, safe from sorting machines, and guests see it the moment they open the flap.
- On the card itself. Often paired with a ribbon or a sprig of dried greenery.
Seals placed inside the envelope avoid most mailing concerns.
Step 3: Pick the stamp and the wax
Design. Ready-made stamps come in florals, botanicals, initials and simple motifs such as hearts. A single initial stamp, the first letter of your shared last name for example, is a popular choice. A two-letter monogram or a custom crest requires a custom-engraved stamp, which takes longer to produce, so order early if you want one.
Size. A 25 mm stamp suits most envelope flaps. A 30 mm stamp makes more of a statement and uses more wax.
Color. Choose a wax that either matches your palette or contrasts cleanly with the envelope. Gold, white, sage and dusty tones are common wedding choices; deep burgundy and green suit autumn and winter. Order a small quantity first and test it against your actual envelope, because colors on a screen are only a guide.
Flexibility. If the seals will be on the outside of mailed envelopes, look for a wax described as flexible or mailable. Brittle wax can crack in transit.
Step 4: Work out your quantities
Count your envelopes, not your guests. One invitation usually goes to each household.
Then add extras: about fifteen to twenty percent more seals than envelopes covers practice pieces, rejects, late additions to the guest list, and a few keepsakes.
Beads. A 25 mm seal takes around three standard beads; a 30 mm seal around four. Sizes vary by brand, so test first. For 100 invitations with a 25 mm stamp: 120 seals at three beads each is 360 beads.
Glue gun sticks. These are much faster for a batch. Suppliers estimate roughly eight to ten one-inch seals per stick, though this depends on the stick. For 120 seals, that suggests about fifteen sticks. Check the diameter against your glue gun before ordering.
Adhesive dots. One per seal if you are making them ahead, plus spares.
Buy all your wax in a single order so every seal comes from the same supply.
Step 5: Set up a production line
A little organization makes the work calm instead of chaotic.
- Cover the table and lay out a silicone mat or a long sheet of parchment.
- Chill the stamp. Keep an ice pack beside you and rest the stamp head on it between impressions. Dry the face before each press.
- Run a test batch. Make five seals. Adjust the amount of wax and your timing until you like the result.
- Work in rows. With a glue gun, pour four or five pools in a row, then go back and stamp them in order. With beads and a spoon, work one seal at a time.
- Let them cool completely before peeling. Warm seals bend and lose detail.
- Sort as you go. Set aside your best seals for the invitations and keep the imperfect ones for reply envelopes, favors, or remelting.
- Apply the adhesive. Stick a dot on the back of each cooled seal. When you are ready to assemble, peel the liner and press the seal onto the envelope for a few seconds.
A second person helps a great deal: one pours, one stamps. Before you commit an evening to the task, time yourself on ten seals so you know how long the full run will take.
If you want to highlight the design, run a metallic marker lightly across the raised detail once the seals are cool, and let the ink dry before stacking.
Step 6: Mail them safely
USPS allows wax sealed envelopes. What matters is postage and protection.
Postage. A letter with a stiff, raised element can be classed as nonmachinable, which carries a surcharge on top of regular postage. Under the USPS price list effective October 4, 2026, a one-ounce letter is $0.82 and the nonmachinable surcharge is $0.49. Square envelopes are nonmachinable because of their shape, seal or no seal. Wedding invitations often weigh more than one ounce as well, which adds $0.29 per extra ounce. Rates change, so confirm the current figures.
Have one weighed. Assemble one complete invitation with everything in it and take it to the post office. Ask what it costs to mail. Buy stamps for that amount.
Protect the seal. The most reliable method is an outer envelope, so the seal never touches sorting equipment. If the seal must be on the outside, use a flexible wax, keep the seal low and flat, and seal the flap with glue so the wax is not holding the envelope shut.
Send a test. Mail one finished invitation to yourself before sending the rest. You will see exactly how it arrives.
Our full guide to mailing wax sealed envelopes explains the rules in more detail.
A sample timeline
This is one way to pace the work, not a rule. Adjust it to your own dates and to the delivery time of your supplies.
- Ten to twelve weeks before mailing: choose the stamp design; order custom stamps now if you want one.
- Six to eight weeks before: order wax, tools and adhesive dots. Allow for delivery time.
- Four weeks before: make test seals; take one assembled invitation to the post office.
- Two to three weeks before: make all the seals.
- One week before: assemble, seal and stamp the envelopes.
- Mailing day: hand them over at the counter instead of using a street mailbox.
What you will need
- Wax seal stamp
- Sealing wax beads or glue gun sticks, plus twenty percent extra
- Melting spoon and tea lights, or a glue gun that fits your wax sticks
- Silicone mat or parchment paper
- Ice pack
- Double-sided adhesive dots
- Metallic marker (optional)
Our wax seal kits include a wedding set built for batch work, and wax seal stickers are there if you would prefer to skip the melting altogether.